Introduction In the last post, Simple Cisco MPLS Core w/ L3VPN (Part 1), we created a simple MPLS core using Cisco CSR1000v routers which was similar to the Simple Juniper MPLS Core w/ L3VPN (Part 1).  Now that the basics are in working order (remember, the simple core does not do anything special such as…

Introduction I decided to create a few follow-up posts on the Multiprotocol Label Switching (MPLS) topic but instead of focusing on Juniper configurations, I am going to re-create the topology using Cisco configurations.  In all honesty, the basics are the same in how the topology works with regards to using an internal routing protocol (again,…